The salt read out has been at 2200 for a couple of days. Still Check Salt and Check Cell? I have checked both. I don't know weather to trust those test sticks for the salt or if there is something better that I should use. Anyone have any thoughts?
Re: Saniclear 40 SWCG Trouble
The salt read out has been at 2200 for a couple of days. Still Check Salt and Check Cell? I have checked both. I don't know weather to trust those test sticks for the salt or if there is something better that I should use. Anyone have any thoughts?
PF=5; 23K gal IG kidney vinyl pool, Triton II Sand Filter, Whisperflow VS Pump, Taylor 2006 kit, Jacuzzi/Carvin Saniclear 40 SWCG
Re: Saniclear 40 SWCG Trouble
Replying to my thread...I still don't have the salt system running correctly. I did have the water tested at the pool store. It was 3900...too high. I drained about 14" and added fresh. We have also gotten about 2" of rain. The stick test still says 3650. The system isn't reading correct. It says 2000. The cell look new. The board seems to be operating correct. I will try draining and adding again to see if I can get it to drop at least to about 3200. Is anyone familiar with the Saniclear 40 system. It is difficult to find information about it.
PF=5; 23K gal IG kidney vinyl pool, Triton II Sand Filter, Whisperflow VS Pump, Taylor 2006 kit, Jacuzzi/Carvin Saniclear 40 SWCG
Posting Permissions
Reply With Quote
Bookmarks