I have an older built 16x32 inground pool made up of a concrete/gunite (unsure) bottom floor with a safety ledge and fiberglass wall panels. I have a reoccurring leak and a paint job that is steadily flaking off because I used the wrong paint. I want to put a liner in my pool to take care of both my issues. I'm no expert in pools, and so I need advice on what exactly to do. I understand that if my pool doesn't already have the right coping with the track, it's pointless to insert a liner. I am willing to cut my pool deck and replace my coping with the correct coping and track. At this point I'll do whatever it takes!

Also, something you all should know. My pool floated above the ground 18" in the deep end, and so I had to cut the top of the walls off to match the level of the deck. When it floated, it cracked, and that's why my pool is leaking.

Thanks for your time, advice and comments,
Jarrod