+ Reply to Thread
Results 1 to 8 of 8

Thread: Using Sprinkler Pump to fill pool?

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    Green Bay, WI
    Posts
    76

    Default

    Yes, I add lots of CL right away on the fill and keep it at shock levels until full to make sure nothing is living in there

    I also put the fill hose right at the bottom intake so it goes right in to the sand filter for some additional filtration right away as well.

  2. #2
    duraleigh Guest

    Default

    Hi, Al,

    If you have a sand filter you can plumb the irrigation pump into the waste line and set the filter to backwash. The water then goes through the filter in the correct direction for filtering and comes out the skimmer
    .

    While I am completely convinced you are "da' man" for interesting, innovative fixes on pools.......I am racking my brain trying to figure out the advantage in doing this. I know you had a reason and I can usually figure things out but you've stumped me on this one. Help!!

    Dave S.

+ Reply to Thread

Similar Threads

  1. Easier way to keep pool fill?
    By weifert in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-29-2012, 10:50 PM
  2. Fill with only 1 foot of water and don't fill for 24-48 hours?
    By Jacob99 in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 04-26-2012, 06:00 PM
  3. Have to fill my pool in, what do I use
    By timmie in forum In-Ground Pool Construction and Repair
    Replies: 7
    Last Post: 04-30-2009, 07:35 PM
  4. Adding sprinkler control to add water
    By beary in forum In-Ground Pool Construction and Repair
    Replies: 4
    Last Post: 01-28-2007, 08:45 AM
  5. Connecting Pool Fill Line to Sprinkler System
    By joelq in forum In-Ground Pool Construction and Repair
    Replies: 8
    Last Post: 07-09-2006, 03:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts