I don't have your answer, but if you post the valve brand and model number, you have a much better chance of getting a useful answer. Posting detailed might help too.
http://www.poolforum.com/pf2/showthr...oolForum-(2018) tells how to post pics.
I have an above ground pool with a sand filter, I noticed that when on “filter” setting that there is water coming from the “backwash” valve outlet
Any suggestions
Thanks Barry
I don't have your answer, but if you post the valve brand and model number, you have a much better chance of getting a useful answer. Posting detailed might help too.
http://www.poolforum.com/pf2/showthr...oolForum-(2018) tells how to post pics.
Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27
It is a Jacuzzi L190 sand filter , the valve is part number 39-2628-03 7 position dial valve
I'm not familiar with that filter, but here's a link to the manual.
https://www.psposeidon.com/uploads/l...0123132955.pdf
Seems to suggest a bad o-ring. Sorry I can't help more, maybe someone else can.
Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27
Bookmarks