+ Reply to Thread
Results 1 to 10 of 47

Thread: Too much DE in pool

Hybrid View

  1. #1
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: Too much DE in pool

    How much DE did you put in? If your pressure is running high, keep cleaning the filter and brushing. Eventually you'll filter out all the excess DE. If your pressure is running low, that means the DE - and lots of other stuff - is bypassing the filter grids. And all this has nothing to do with green.
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  2. #2
    Join Date
    Jul 2011
    Location
    Los Angeles, CA
    Posts
    48

    Default Re: Too much DE in pool

    It WAS running high. Now it's normal. But I still have all this DE in my pool.

    I believe it's a 2000 series filter.
    20,000 gallon plaster (concrete) pool
    DE filter
    Nature 2 (unchanged)

  3. #3
    Join Date
    Jul 2011
    Location
    Los Angeles, CA
    Posts
    48

    Default Re: Too much DE in pool

    Everything else checked out normal. Some DE at the bottom of the filter, most of it on the grids, which were new last year and have no holes.
    20,000 gallon plaster (concrete) pool
    DE filter
    Nature 2 (unchanged)

  4. #4
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: Too much DE in pool

    Okay. If you keep brushing and stirring up the DE where the filter can catch it, then cleaning when pressure gets high, you'll eventually get that issue cleaned up. If there's a walmart close to you that has the HTH 6Way pool test kit, get one and tell us what your chlorine, ph, and CYA levels are. Then someone can help with the green.
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  5. #5
    Join Date
    Jul 2011
    Location
    Los Angeles, CA
    Posts
    48

    Default Re: Too much DE in pool

    Alright. So no to the flocculant, then. You sure?
    20,000 gallon plaster (concrete) pool
    DE filter
    Nature 2 (unchanged)

  6. #6
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Too much DE in pool

    If it IS DE, flocculant will NOT help. DE settles more quickly than flocc-ed algae . . . if you turn the pump off.

    I haven't read this thread carefully, but I read enough to know that you need to verify that it IS DE, and not dead algae. If you grab a pinch, DE will have texture and substance; dead algae will not.

    And IF it IS DE, something's wrong with the filter, though it could just be a mis-oriented valve.

  7. #7
    Join Date
    Jul 2011
    Location
    Los Angeles, CA
    Posts
    48

    Default

    Well, it wasn't in the pool til I cleaned the filter. Then it was in the pool immediately. It's not dead algae, as far as I know. It's been a couple months, and it immediately clouds the pool the minute I stir it up. It's greenish now, but it used to be more-or-less white.

    The strange thing is that I could swear I saw it spouting back into the pool the minute I put the DE in, much faster than the water actually goes.

    ===========================

    BTW, this equipment is dead simple. Just off and on. If by a mis-oriented valve, you mean one of things on top with multiple settings (I have one of those on our pond), it's not that.
    Last edited by PoolDoc; 05-31-2018 at 02:33 PM.
    20,000 gallon plaster (concrete) pool
    DE filter
    Nature 2 (unchanged)

  8. #8
    Join Date
    Jul 2011
    Location
    Los Angeles, CA
    Posts
    48

    Default Re: Too much DE in pool

    I've got a couple other test kits here. One's called Guardex; the other doesn't have a name. But the refills are from Home Depot.
    20,000 gallon plaster (concrete) pool
    DE filter
    Nature 2 (unchanged)

  9. #9
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: Too much DE in pool

    I'm absolutely certain that MOST of the time, the experts here, and I'm not one of them, advise against flocculants. That might clear the DE out of the pool quicker, but many flocculants contain other "stuff" that is bad for your pool and often introduce other issues that are much more difficult to correct than filtering excess DE from the water. I assume you are running the pump 24/7? Are all your test kits strips? If you have a drop based (titration) kit, that will probably get you by for now.
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  10. #10
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: Too much DE in pool

    Also, if PoolDoc or one of the others does advise a flocculant later, maybe they can offer a good choice brands. Waiting a day at this point isn't going to make much difference, and it is much easier to add something tomorrow, than to remove something you shouldn't have added today. POP means Pool Owner Patience - that's a term that I learned here. I've often heard that lack of POP is one of the biggest problems pools have.
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts