[ Upgraded membership; moved thread to pool equipment section => you may need to log in and log out to gain access! ]
Your numbers aren't bad, and though your chlorine should be a lot higher, I'm not sure that's the problem. (BTW, 1 gallon of 8% bleach will raise your chlorine about 3 ppm.)
If I had to guess, I'd guess that you (a) may have started up a mess, and (b) have a low end sand filter that's too small for your pool, coupled with a pump that's too large. That is a very, very common problem with AG pools. The most practical way to check this is using the DE Test: http://pool9.net/de-test/
Bookmarks