+ Reply to Thread
Results 1 to 4 of 4

Thread: Adding a SWCG and need help

  1. #1
    Join Date
    May 2011
    Location
    Reading, PA
    Posts
    29

    Default Adding a SWCG and need help

    I've been doing the BBB method very successfully for years and would like to add a SWCG for convenience. I would appreciate any equipment recommendations. (I tried to access the link on the other thread about equipment comparisons but couldn't and it is pretty old so i'm sure things have changed)
    I would also like to know what additional testing products I will need. I'm assuming I need a TAYLOR K-1766 DROP TEST. Do I need a salt meter or is there an alternative?

    Any info and input would be great. I have tried to read through all the threads but if there is any you can recommend that I should pay more attention to let me know.

    THX!!!
    In ground, outdoor, vinyl liner, 22,000 gallons w/Aqua Genie skimmer installed in 2008, 1 HP Hayward 2-speed Super Pump and Hayward pro series high rate S244T both installed 2016

  2. #2
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    798

    Default Re: Adding a SWCG and need help

    I've had an Aqua Rite SWCG since 2004 and have been very satisfied with it.

    Make sure you get a unit with a cell rated at least twice the gallons of your pool.

    That Taylor salt test kit is generally the one that's recommended. Personally, I've found the AquaChek salt test strips to be accurate enough.

    Also, to maximize cell life, the SWCG should only be used to maintain proper FC level. If you need to boost FC for any reason, use bleach or liquid chlorine to do so.
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; I put together individual Taylor kits that combined is the same as the Taylor K-2006; city; PF:6

  3. #3
    Join Date
    Oct 2013
    Location
    United Kingdom
    Posts
    149

    Default Re: Adding a SWCG and need help

    You might want to consider pH doser with the SWCG to counter the likely upward drift of the pH (depending on your TA level as well)
    How about the pool pilot nano?
    Passivpool Energy A++ rated pool, the most efficient in the world! 24ft x 12ft, 12000 gallons I/G vinyl lined pool, variable speed pump 0.08hp,(30-60 watts) running 24/7. AFM glass media 24" sand filter, Strantrol chemical injection

  4. #4
    Join Date
    Apr 2006
    Location
    Scottsdale, Arizona
    Posts
    527

    Default Re: Adding a SWCG and need help

    I have the SGS Breeze 540 system on my pool and have not had any issues in 7 years. 2 things i like about it over the previous unit are the clear cell tube allows you to see when the cell gets dirty (and see if it is not producing chlorine) and the cell can be cleaned using a wood paint stir stick. No acid. I feel the acid approach to cleaning them degrades the cells life.
    14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7

+ Reply to Thread

Similar Threads

  1. Adding salt without a SWCG
    By jjl64 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 09-03-2014, 10:20 PM
  2. Adding Salt To Pool Without SWCG
    By Enigma869 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 06-09-2014, 10:00 AM
  3. Buy SWCG?
    By cskid in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 01-25-2014, 07:06 PM
  4. How much CL from SWCG?
    By under_h2o in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 8
    Last Post: 08-24-2006, 11:13 PM
  5. BBB or SWCG ??
    By GraceByDesign in forum Pool Chemicals & Pool Water Problems
    Replies: 7
    Last Post: 06-18-2006, 07:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts