Is this a new pool? Have you talked with your pool builder to see what they say?
Noticed the first couple days after my new pool was finally filled a few stains in the pool. After reading this forum I was more concerned and had my water tested for metals which was 0. I got one of those erasers from Leslie's and rubbing lightly on my new black bottom plaster seemed to remove it although it did leave a mark on the plaster. There are a couple more about a dime size and one of the more darker one looks like its missing plaster about a BB size in diameter and about the thickness of a DVD if that. I didnt want to rub it with the eraser not knowing what further damage it may cause so I have been monitoring it for the past week now. Salt is goign to be added in a few weeks.
Is this a new pool? Have you talked with your pool builder to see what they say?
Completed 8/21/06
14,000 gallon 3'-6' concrete pool with Diamond Brite
Spa with spillway
250K BTU gas heater (for spa)
SWCG - Aqua Rite
Hayward Super II Pump - Cartridge filter
See pictures here http://www.philsimmons.com/family/ga...mages&keyword=
actually I am the owner builder, and yes the pool is new about 2 weeks worth of water now.
Have you asked the company who did the plaster? The reason I ask is that you don't want to do anything that will void the warranty.
Completed 8/21/06
14,000 gallon 3'-6' concrete pool with Diamond Brite
Spa with spillway
250K BTU gas heater (for spa)
SWCG - Aqua Rite
Hayward Super II Pump - Cartridge filter
See pictures here http://www.philsimmons.com/family/ga...mages&keyword=
No I am just waiting or monitoring the stains, There are still just the two small stains about a dime size if that. not getting any worse. Though I should call them to take a look at it.
Bookmarks