+ Reply to Thread
Results 1 to 2 of 2

Thread: Jandy SWG problem?

  1. #1
    Join Date
    Jun 2006
    Posts
    3

    Default Jandy SWG problem?

    Hi everyone I have a brand new Jandy 700 that will not produce chlorine. My water parameters are great and I have a aquarite system from my prior pool that when I hook up works great . The Customer service and people at jandy are useless . I have had proffesionals out to check the unit and they said that the Jandy product is just inferior to the other brands. Is this true are the Jandy swg that bad? is anyone here having any sucsees with either the 700 or 1400 model? Thanks everyone Great forum Here. J

  2. #2
    Join Date
    Dec 2005
    Location
    Orange, CA, USA.
    Posts
    30

    Default Re: Jandy SWG problem?

    I've got a 1400 working just fine the last 9 months since install. I've got it set to 65% right now for an 18,000 gallon concrete pool. Pool water is 90 and CYA is 50ish. It keeps chlorine between 3-5+ depending on if I test while the cell is on or not. No problems whatsoever. Could be a bad flow sensor...

+ Reply to Thread

Similar Threads

  1. jandy 2 speed pool pump problem
    By fordgt in forum --cleanup--
    Replies: 1
    Last Post: 07-02-2013, 07:43 PM
  2. CVA-24T Actuator on a 3-Way Jandy Valve Problem
    By JMarko in forum --cleanup--
    Replies: 0
    Last Post: 01-05-2013, 03:43 PM
  3. Help with Jandy RS8 PCB Problem?
    By jdidonato in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 01-06-2008, 09:39 PM
  4. Jandy pump problem
    By Bergerman in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 05-29-2007, 06:32 PM
  5. Jandy Aquapure SWG Circuit Boad Problem
    By guild1 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 8
    Last Post: 09-23-2006, 10:29 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts