Did you figure out what to do? I can't imagine a week in the summer causing that, but I don't know much about covers.
After just two winters, my cover is tearing like paper! It is a "triple laminated polyethylene double-stitched" but it is ripping at the slightest tug!!! Definitely need to replace it, but looking for suggestions to avoid recurrence in a few years. One theory - I used it for a week's vacation in July. Could a week in the summer sun make that fabric so brittle? Looking ahead, I intend to use my cover for winter AND for 7-10 day summer vacations. Is there a brand / type you can recommend for this? NOTE: I am not open to leaving it uncovered for winter or during summer vacations. Thanks in advance for any feedback!
Steve Romo (6700g AG, Cartridge Filter)
Did you figure out what to do? I can't imagine a week in the summer causing that, but I don't know much about covers.
26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO
Deffo wouldn't go near that cover again. Mine is 13 years old this winter. it goes on the pool in September, comes off the pool end of May. It's made from tough polyester and vinyl (UV stable)
Bookmarks