Hi there! I have a Pool Pilot bought in 2006, and I have replaced the cell a few times, always with original parts. After the most recent replacement, I noticed that my pool is no longer getting chlorinated (i.e. ZERO chlorine level). The Pool Pilot starts fine, indicating 3,000 ppm salt, but after less than one minute it starts flashing with a "Low Amps" message.

What's the best way to diagnose the problem? I could put the old cell back in (it was still working, although not as well) but is there anything else I can or should do? The self-test didn't provide any useful information.

There used to be some Pool Pilot guy helping folks on this forum. Is it still happening?

Thanks!
Luigi