+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: Chlorine level

  1. #1
    Barry J is offline Registered+ Thread Analyst Barry J 0
    Join Date
    Dec 2004
    Location
    .
    Posts
    68

    Default Chlorine level

    My chlorine level is coming back at less than 0.5 ppm. The sample is pretty much clear after adding the OTO. And when using the Taylor kit with the DPD powder.. Does not turn pink.
    When I test the cyanuric acid it comes out to about 90-100. I just ran out of the cyanuric acid for testing, ordering more.
    The pool is clear, so far, but seeing some pink build up along the sides. Very little
    I want to catch this before it is out of control.
    Ph = 7.2. Alk = 60
    Is a AG 33 x 15 pool
    Should I shock?? Just worried about cysniric going higher.
    Using HTH pucks
    Any suggestions
    Thanks
    Barry

  2. #2
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Chlorine level

    Use straight liquid chlorine or bleach to bring you up to "shock" level according to the best-guess chart and keep it there until you can pass an overnight test. Make sense?
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  3. #3
    Barry J is offline Registered+ Thread Analyst Barry J 0
    Join Date
    Dec 2004
    Location
    .
    Posts
    68

    Default Re: Chlorine level

    Ok, so shock it tonight to bring Cl level up, that is what I thought...should I worry about Cyanuride level going up ??
    Would 90 appear to be a good level for stabilization

  4. #4
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Chlorine level

    The pucks have given you a lot of CYA. 90 is very high. Your shock level is 20-22ppm FC. http://www.poolsolutions.com/gd/best...e-chart.html#a

    Use bleach or liquid chlorine rather than bagged shock as that will not raise your CYA level.

    Have you considered doing a partial drain and refill of the pool to lower your CYA?
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  5. #5
    Barry J is offline Registered+ Thread Analyst Barry J 0
    Join Date
    Dec 2004
    Location
    .
    Posts
    68

    Default Re: Chlorine level

    To be honest with you, I have not used the pucks that often this year, maybe twice a week, if that...I will use the liquid shock tonight, think I should switch to the granular HTH, I have some of that left ??
    With a week of 90 degree weather and sun all week, think that will lower my CYA ?

  6. #6
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Chlorine level

    Your CYA will only lower significantly through dilution and occasionally over the winter.

    What is in the HTH granular? Is there cyanuric acid? Does it say Tri-Chlor or Di-Chlor? Both of those will raise your CYA higher.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  7. #7
    Barry J is offline Registered+ Thread Analyst Barry J 0
    Join Date
    Dec 2004
    Location
    .
    Posts
    68

    Default Re: Chlorine level

    I am going to shock it tonight..The liuquid shock I have is Sodium hypochlorite 12.5%...will this raise my CYA level, or can I use it

  8. #8
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Chlorine level

    That is perfect! That is liquid chlorine with NO CYA. Remember, you need to get the FC up to about 22ppm and keep it there by testing and adding until you pass the overnight test.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  9. #9
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    751

    Default Re: Chlorine level

    Quote Originally Posted by FormerBromineUser View Post
    That is perfect! That is liquid chlorine with NO CYA. Remember, you need to get the FC up to about 22ppm and keep it there by testing and adding until you pass the overnight test.

    Agreed.

    Keep in mind I'm no expert, just a forum member who's been here awhile. Unfortunately the "experts" that use to post here haven't posted in a long time.

    It's important to keep FC at shock level until 3 criteria are met;

    1. Water is clear; no visible algae
    2. < .5 CC (combined chloramines)
    3. Overnight FC loss is 1ppm or less.

    As was stated, do not use anything that contains CYA, i.e. pucks, sticks, DiChlor, trichlor, etc. stick with plain bleach (no scents, no splashless varieties) or "liquid chlorine". Bleach and liquid chlorine (they are the same thing actually, just perhaps different concentrations) do not add CYA.

    Do consider a partial drain/refill to lower CYA. 90 is pretty high, requiring more FC to perform a proper shock. Unless you are using a SWCG, your CYA should probably be 30-50ppm.

    I hope this helps.
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

  10. #10
    Barry J is offline Registered+ Thread Analyst Barry J 0
    Join Date
    Dec 2004
    Location
    .
    Posts
    68

    Default Re: Chlorine level

    Ok tested my cyanuric acid again, and comes out to around 80.
    Tried to test for free chlorine with the Taylor kit and the water did not turn pink , just very light pink, but it turned pink the other day.
    When it turned pink the other day, I tested further with the sample for combined chlorine but did not turn pink again, so got no result for that, but like I said, did not really turn pink today, so I figured need chlorine.
    I did the cheap HTH test for chlorine (OTO), and got <0.5
    I am going to shock again tonight and add granular HTH, which is Calcium hypochlorite.
    The Ph was 7.4 and alk 80.
    I am still kind of in the dark with the whole CC, FC , TC
    I'll try to read a little about that tomorrow.
    Any suggestions/comments
    Thanks
    Barry

+ Reply to Thread

Similar Threads

  1. Unable to keep chlorine level and CYA level has dropped from 38 to 21 in 1 day.
    By lizbyrne2000 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 06-22-2013, 11:41 AM
  2. LOW chlorine level...help
    By Kaliomele in forum Pool Chemicals & Pool Water Problems
    Replies: 2
    Last Post: 06-17-2013, 02:50 PM
  3. CYA level and chlorine level and pool store recomendation
    By Fishcrazy in forum Using Chlorine and Chlorinating Chemicals
    Replies: 31
    Last Post: 08-21-2011, 10:25 AM
  4. chlorine level ?
    By LazyLgrecian in forum Using Chlorine and Chlorinating Chemicals
    Replies: 7
    Last Post: 05-09-2007, 07:57 PM
  5. High Chlorine Level with no Chlorine Added in 6 weeks
    By morechoff in forum Pool Chemicals & Pool Water Problems
    Replies: 3
    Last Post: 06-27-2006, 07:52 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts