+ Reply to Thread
Results 1 to 8 of 8

Thread: Testing Questions

Hybrid View

  1. #1
    Join Date
    Dec 2004
    Location
    Indiana.
    Posts
    700

    Default Re: Testing Questions

    Quote Originally Posted by medvampire
    I have a 2 hp pump and 22 in sand filter.

    1. Just how accurate do I need to be? The CH color standards are not very good.

    Before you get too far, CH is commonly used as Calcium Harness in "pool talk", so to avoid confusion you should use Cl. The standards are easier to use against a white background.

    2. I have my oldest do a strip test before I let them get in during the day because I work nights and am snoozing. Are they good enough to use for them to get a guess before getting in the pool?

    I'd have to say that is probably a good use for the strips, as long as you know the chlorine isn't insanely high, which can bleach out the strips.

    3. Is there a better method for CYA than the turbidity method?
    4. Does oxygen shock (what can I say I got pool stored before I found this site) affect the CH test?

    No

    5. When is the best time of day for me to test?
    6. Will the ALK slowly come down over time by adding acid to keep the PH down to 7.4 or do I need to go ahead and do the low PH and aeration procedure?

    The alkalinity won't move much at 7.4 pH, but you are okay where you are with a vinyl liner.


    7. Will I ever get my life back and get less anal about the chem. in the pool?

    It takes me less than 2 minutes a day to test and dose my pool with bleach. A few extra minutes on Saturday to do the full-up tests. You will get a feel for it and it will become routine.
    Your pump is way oversized. You may have filtering issues and electric bill issues with that thing. You could get by with a 3/4 HP pump.

  2. #2
    Join Date
    May 2006
    Location
    Tennessee
    Age
    57
    Posts
    234

    Default Re: Testing Questions

    Sorry about the Ch vs Cl

    Got "pool stored" on the pump and filter. My problem is that I work in rotation at a hospital for 7 days and have about 8 or so hours at home at that time. The kids talked me in to getting the pool but I enjoy it in my off time. I will test the cl and ph each day but I am nervious about adding chlorx when I cant be here to test the levels before the boys dive in.

    Thanks
    Steve

  3. #3
    Join Date
    May 2006
    Location
    Downingtown, PA
    Posts
    192

    Default Re: Testing Questions

    Steve,
    If you add the bleach every night and then run the filter till morning the chlorine will be distrubuted throughout the water. As long as you aren't shocking the pool, i.e. dumping 4 jugs of chlorox in, it should be fine for them to go in the following morning. Just use the bleachcalc so you aren't dosing past target ppm.

    ** Also, I see from your sig that you use the Nature2... search for Nature 2 and read through the posts... you may have gotten 'pool stored' on that one too. Don't replace the cartridge next time.
    Outside of Philadelphia, PA
    18' x 40' IG - 22K gallons
    Sylvan Gunite Pool (1979)
    Plaster re-done (1997)
    48 Sq Ft Hayward D.E. Filter (2003)
    1.5 hp Hayward Super Pump (2006)

  4. #4
    Join Date
    May 2006
    Location
    Tennessee
    Age
    57
    Posts
    234

    Default Re: Testing Questions

    Didnt plan to waste my $$$ on a nature 2 cartridge after reading here but I am gonna keep it in line for the trichlor tabs. I am put my bucks on one of bens kits

    thanks
    steve

+ Reply to Thread

Similar Threads

  1. Cya testing
    By RedwingT in forum Pool Chemistry for Intex-type Pools
    Replies: 22
    Last Post: 09-14-2012, 07:00 AM
  2. Pool just opened, awaiting on testing kit, questions on what to do now
    By pool1 in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 13
    Last Post: 04-25-2011, 04:14 PM
  3. New Pool Owner Questions - 8 questions!! :)
    By kmmlangston in forum Testing and Adjusting Pool Water Chemistry
    Replies: 11
    Last Post: 05-30-2010, 04:33 PM
  4. First post! A few testing questions...
    By Henrys514 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-04-2006, 08:14 PM
  5. pH Testing
    By bmgo in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 05-23-2006, 02:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts