Quote Originally Posted by waste
I know that 2 couplings and a peice of pipe could fix it, but... how would you get the pipe into the second coupling? When dealing with a 'fixed' ridged pipe, you don't have the room for the 1&1/4" slip fitting. 'No hub couplings' -A/K/A Fernco's- would work, but I usually use 4 90's, do you have a better way? ( If you could tell me it, it would be a real help) - Thanx
Cut your replacement pipe about 1/8" shorter than the pipe your cut out. Use a SLOW set pvc cement. Apply liberally onto all pipes and slip fitting couplers. Place couplers on both ends of replacement pipe and slip into place and then move couplers to the desired spots. The trick is the slow set pvc. Hardens in minutes instead of seconds. I am no professional. But this technique has worked for me.