Results 1 to 10 of 21

Thread: filter/pump problems - pool newbie

Threaded View

  1. #12
    Join Date
    May 2006
    Location
    Downingtown, PA
    Posts
    192

    Default Re: filter/pump problems - pool newbie

    If you had damaged filter fingers stuff would be coming out the returns back into the pool. If that is happening you have a problem with the filter. I think some people here run a pressure around 20psi, my norm is 11psi not that it matters. Without running the pool with a clean filter and clean pool it might be tough to know what the "normal" pressure should be. Is there THAT much junk in the water? Hang in there and keep the Chlorine level up in shock territory.

    Pottstown huh? We're practically neighbors!
    Last edited by Bleach=Chlorine?; 06-15-2006 at 04:25 PM.
    Outside of Philadelphia, PA
    18' x 40' IG - 22K gallons
    Sylvan Gunite Pool (1979)
    Plaster re-done (1997)
    48 Sq Ft Hayward D.E. Filter (2003)
    1.5 hp Hayward Super Pump (2006)

Similar Threads

  1. newbie problems
    By camastown in forum Pool Chemicals & Pool Water Problems
    Replies: 1
    Last Post: 07-07-2012, 01:35 PM
  2. Filter/Pump Unlevel - Problems & Questions
    By jmaj43 in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 08-03-2009, 07:46 PM
  3. pump and filter problems
    By pamelal41 in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 03-03-2009, 07:54 PM
  4. Pool stored...oversized pump, huge filter, newbie questions
    By Mom2Czars in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 07-25-2006, 08:58 PM
  5. Newbie pump/sand filter AIR question
    By famdog in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 06-01-2006, 09:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts