I just realized i posted this in the wrong section... I got it fixed though. I used Pam Cooking Spray and it slid out pretty easy. Lower o ring was destroyed. All good now.
My Backwash valve has been getting harder and harder to pull up (It's the kind you twist to unlock and then pull up to select backwash mode) so i bought some new o rings and want to replace and lube them. Well, I can't get the valve to come out. It will pull up to the same point as the backwash selection but not any further with all the screws removed.
I tried a little dawn dish soap but that did not help at all.
Any advise?
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
I just realized i posted this in the wrong section... I got it fixed though. I used Pam Cooking Spray and it slid out pretty easy. Lower o ring was destroyed. All good now.
14'x31' kidney 21K gal IG plaster pool; SWCG (Saline Generating System's SGS Breeze); Pentair FNS Plus 48 DE DE filter; Whisperflow 1 HP pump; 8 hours hrs; kit purchased from Ben; utility water; summer: none; winter: none; PF:5.7
Great!!!
26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO
The best time of year for fixing stuff!
Happy new year to all.
Happy New Year!
26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO
Bookmarks