Quote Originally Posted by swimdaddy View Post
Ok, that's what I was wondering. My filter normally runs at 16 PSI, and with the ball valve I drop that to about 12 PSI and that seems to work well, but if I burn out my motor I'll be wishing I had upgraded the pump or filter. I was looking for the cheap fix.
I would recommend buying another filter, the same filter you have now and connecting them both into service. This will double the surface area of filtration whilst keeping reasonable sized plumbing into each. This is preferable to have to try and sell off your filter and buy a single one slightly larger. I would have put that down as the cheapest fix.