+ Reply to Thread
Results 1 to 3 of 3

Thread: Constantly recalibrating a swimpure

  1. #1
    Join Date
    May 2014
    Location
    Venice, FL
    Posts
    8

    Default Constantly recalibrating a swimpure

    I have a T-Cell 15 that is around 4 years old. I am running into a problem where the salt level is not registering properly. My salt is at 3200 but it keeps showing much lower than that to where the salt generator turns off.

    If I recalibrate back to 3200, it seems to generate chlorine for a day or two, then the it recalibrates back down to where the salt generation turns off.

    I have cleaned the unit but it doesn't seem to make a difference.

    My question is, does this mean the unit is going bad or the controller or a censor????

    Thanks

  2. #2
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    751

    Default Re: Constantly recalibrating a swimpure

    Could be a sign the cell is dying. I've replaced 2 cells and each time I got false low salt readings when they died.
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

  3. #3
    Join Date
    May 2014
    Location
    Venice, FL
    Posts
    8

    Default Re: Constantly recalibrating a swimpure

    Thanks for the response. That was what I was thinking.

    I may just keep recalibrating the thing every couple of days until it produces no more chlorine.

+ Reply to Thread

Similar Threads

  1. Hayward Swimpure : Should I replace cell, board, or entire unit.
    By TheGoose in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 08-09-2015, 03:00 PM
  2. Replies: 0
    Last Post: 04-26-2015, 06:09 PM
  3. Hayward Swimpure + No Flow Light Flashing vs. Solid
    By raddrider in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 0
    Last Post: 05-26-2013, 07:58 PM
  4. Review-Hayward Swimpure SWCG up to 40,000 gallons
    By TheGoose in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 8
    Last Post: 08-23-2011, 09:03 PM
  5. "pH UP" Constantly Needed...
    By OhAllWet in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 07-17-2006, 04:24 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts