Can this hose be repaired?

[Whetstone613]

...and I guess it never will be posted.
Ok, I figured out how to use Drive

[Whetstone613]

I finally called the store where I bought it and they said it can't be repaired. It's near an end, so I guess if I just keep that end at the vacuum, then I shouldn't have a problem. They measure the warranty on it in days

[FormerBromineUser]

If the break is near the end, you can cut it off and put a new end on. Yup, that end would be vacuum end.

[CarlD]

Sometimes you can put a barbed fitting into the hose and secure it with hose clamps. You may want to coat it with JB Weld epoxy first if it's corrugated to fill the gaps.