Re: Replacing a motor on a pump, and getting the correct size for your pool?
I borrowed an ammeter today, and measured a draw of 19A on high and 4-5 on low, on each leg. I don't know much about motors, but that seems excessive. I could see a startup draw spiking really high like that, but not a sustained draw 3x higher than the motor rating.
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
Bookmarks