Re: Replacing a motor on a pump, and getting the correct size for your pool?
Am I understanding this right... could this be used to program when the pump is on while also putting a timer on when the pump is switched to a certain speed? Would the main on/off timer feed the switch that determines when the pump is on full speed? That's the sort of thing I'd find handy to have, with manual overrides (if possible.)Originally Posted by mas985
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
Re: Replacing a motor on a pump, and getting the correct size for your pool?
Never mind the previous post. I found the wiring diagram on how it works.
Last edited by mitchryan912; 07-20-2015 at 02:11 PM.
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
Posting Permissions
Reply With Quote
Bookmarks