Sand filter pressure

[graciec]

I am noticing the similar thing.We have a jacuzzi sand filter .I did put 1-2 cups dim.earthtoday and pressure went from about 40-45 lbs,but last year it used to run around 25 before backwashing[no eath last year].
I backwashed today in 2 sessions but it is still not back to where it used to run last year.Why? thanks!

[Poconos]

If we get off the original topic too far I'll split things apart and make a separate thread. Graciec....40-45 seems like a really high pressure for a centrifugal pool pump, which they all are. I suspect your gauge may be way off.
Al

[graciec]

Al,now you've scared me!!!! What should I do? We no longer communicate w/ the place that sold us out stuff 2 years ago.
Is it a matter of resetting the gage?

[graciec]

OK now it's running closer to 50lbs and the gauge needle didn't go back down when I shut it off.Is it supposed to go back down to zero when it's shut off?? can't remember!
I checked the filter basket and it's fine. thanks for any help.

[JohnT]

OK now it's running closer to 50lbs and the gauge needle didn't go back down when I shut it off.Is it supposed to go back down to zero when it's shut off?? can't remember!
I checked the filter basket and it's fine. thanks for any help.

You need a new gauge. It is supposed to zero.

[torsie]

Our gauge broke at the end of the summer '04
and I went to Lowe's to get another one.
The guy said "this isn't the same" but it will work.
It never goes to zero...when it's shut off it goes to 20
and when I turn it on it stays on about 24. If it goes to 30
then I start watching it and usually backwash.
Does anyone think this is a problem as long as I'm aware
of the variations?
TIA

[graciec]

do they go bad that quickly?Even after 2 years? I just tapped on it in off position and it sprang back to 20 or so but it's back up to 40 now. Are gauges available at pool stores? or do I get one from the company that makes our filter?