Reply With Quote
You have a problem with your filter. Either the fabric is torn in one of the filters or the filter is no longer seating properly in the housing and allow debris to get by. Remove the filters and inspect for damage.
Dirt flow back in through return jet
I am getting dirty water sucked up by vacuum line which I am doing myself.It sucks up fine but just blows back through the nearest port. 13 k fiberglass pool 4 cqrtridge filters any help?
13000 gallon fiberglass, variable speed pump, cartridge filter, chlorine sanitized ,k-2006, also daily 5 item check ( ch, ph,ta,)
I only trust the k-2006 titration is better for me
Re: Dirt flow back in through return jet
You have a problem with your filter. Either the fabric is torn in one of the filters or the filter is no longer seating properly in the housing and allow debris to get by. Remove the filters and inspect for damage.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Re: Dirt flow back in through return jet
I did just that...what I found was the filters had a slight bend on the bottom where it seats. I took them all out....cleaned again and reversed where the filters were sitting. Works fine now thank you although I think its time to order new ones. Thanks Dave
13000 gallon fiberglass, variable speed pump, cartridge filter, chlorine sanitized ,k-2006, also daily 5 item check ( ch, ph,ta,)
I only trust the k-2006 titration is better for me
Posting Permissions
Bookmarks