Hi ~ Newbie trying to learn - Not sure what to do to fix my test #s
We just installed an Intex agp 32x16 with 17,000 gallons with a SW filter.
I ordered a k-2006 kit earlier and after adding the salt, letting the filter run for 24 hours, I've attempting shocking the water yesterday:
This morning the #s are:
PH: 8
(It took 3 drops of R-0004 to lower sample to 7.4)
FC: 6
CC:0
CYA: 0
TA: 140 (yesterday it was 120, but maybe human error?)
CH: 120 (same as yesterday before adding bleach)
What should I use to lower the PH and what is the best way to add the CYA and what level should I aim to get? I'd love your advice so I don't mess this up!
I've been reading the forum since before getting the pool and it's been an amazing help already - so thank you ALL for sharing your knowledge - I couldn't have gotten the pool and pump set up without all your posts. You are all an amazing resource - esp since the young girls who work at our pool store have no idea!!
Intex Ultra AGP rectangular 32'x16'x52" (15000 US Gallons), Intex SWCG .95 HP Pump, Titan Titanium HP 80,000 BTU, Taylor k-2006 kit
Bookmarks