Hi ~ Newbie trying to learn - Not sure what to do to fix my test #s

[mawild1]

Hi Carl - Thanks so much for helping me! Yes, the CC is 0
I was raising the FC because I thought I should shock the pool first before we start using it. Ben's Best Guess chart shows min levels of FC of 10-15 for lower CYA (which I am assuming mine is) for shock levels. Maybe I don't need to do this as the water is nice and clear already?
I just came back with the Muriatic Acid, so I will use that tonight when the wind dies down a bit to bring the PH levels down. I'll also try the Tri-Chlor tabs if I can find them after I'm back next week if they are still needed.
I added the salt (360 lbs) according to the recommendation in the Intex manual yesterday, and I haven't actually measured the salt level. I ordered the k-1766 kit from Taylor but it hasn't arrived yet. The pump itself has an indicator for low salt, which isn't flashing - but that's all I know at the moment.
Should I get a salt test strip in the meantime?
Thanks again!

[CarlD]

Usually the salt test function on an SWCG is best, but Intex, being a low cost system may not be as reliable. I just don't know.

With your numbers and a clear pool why would you shock? No need I can see.

[mawild1]

Thank you!