Benchmarking a possibly-expired test kit

[FormerBromineUser]

To answer your question, maybe. It depends.
Which test kit are you talking about? Give as much I do as you can.
Who told you to replace it?

[Whetstone613]

The K-1004. The instructions that came with say the reagents should be replaced after a year.

[FormerBromineUser]

Ugh. That kit has a history of short longevity; it will last two seasons if you stored it inside in a dark area over the winter. That's said with no guarantees.

It is also missing several key tests: the FAS-DPD test for FC/CC and the CYA test.

I am sorry to tell you that to manage your pool properly, even with fresh reagents for the 1004, that kit is just not enough.

I suggest the 2006C, but it is hard to get in Canada. Some people have friends in the states who will buy it and then ship it north.... Right now it is on Amazon for $55-60 usd in the USA. Check your Canada Amazon.

I am sorry I don't have better news.

[Whetstone613]

Ugh. That kit has a history of short longevity; it will last two seasons if you stored it inside in a dark area over the winter. That's said with no guarantees.

Well, I did have it in the garage during the winter, which didn't see a lot of light (and in its case). So are you saying it's probably still working and my chlorine is as low as it says?

It is also missing several key tests: the FAS-DPD test for FC/CC and the CYA test.

I think my kit tests for FC/CC and how important is the CYA test above that of the pH test?

I suggest the 2006C, but it is hard to get in Canada. Some people have friends in the states who will buy it and then ship it north.... Right now it is on Amazon for $55-60 usd in the USA. Check your Canada Amazon.

Since I'm trying to save 50CAD by avoiding buying a new K-1004, that's not on the table right now, unless it lasts 10 years or something.

[FormerBromineUser]

Hi. A few comments:

The kit MAY be good still. CarlD came up with this way to test the strength of his bleach. If you know your bleach is fresh (check the code on the bottle. Code will read something like 15173. That would be the 173rd day of 2015), You could try a sort of reverse of his test. I quote, "So, if you pour 1.88ml of bleach/liquid shock/liquid chlorine into 5 gallons of fresh water, you should get the same FC reading as if you dump 1 gallon into 10,000 gallons of water." You could give that a try. Hope that makes sense.

Secondly, your FC/CC test is very different than a FAS-DPD. The FAS-DPD can test up to 50ppm FC. Yours only goes to 5ppm.

A CYA test is critical to pool management. You must know the CYA level of your water in order to determine the amount of FC necessary to keep your pool sanitary and algae-free. See: http://poolsolutions.com/gd/best-gue...ine-chart.html

Another option is to go get a cheap OTO kit (not refills, you need the kit with the comparator tube). Then you will be able to test FC/CC with fresh reagents although still only to 5ppm. You can use this to at least help go a bit higher: https://lh6.googleusercontent.com/-t...rev%252001.jpg

Finally, I would strongly encourage you to save up for the K-2006C.

Good luck.

[Whetstone613]

The kit MAY be good still. CarlD came up with this way to test the strength of his bleach. If you know your bleach is fresh (check the code on the bottle. Code will read something like 15173. That would be the 173rd day of 2015), You could try a sort of reverse of his test. I quote, "So, if you

I found a number printed on the side saying "14 302 19:10 A4 K1", which I guess means it was from last October (in the early evening).

pour 1.88ml of bleach/liquid shock/liquid chlorine into 5 gallons of fresh water, you should get the same FC reading as if you dump 1 gallon into 10,000 gallons of water." You could give that a try. Hope that makes sense.

Wow, 5 gallons, eh? Can those figures be scaled? Does this mean if I got an eye dropper and added 0.5mL of bleach to 1.33 gallons of fresh water, that I could perform the same test?
Also, what counts as "fresh water"? My water comes from a well and through a softener.
What about the reagents for pH and alkalinity? How viable do you think they are? My pool was tested at 7.8pH and moderate alkalinity.

Secondly, your FC/CC test is very different than a FAS-DPD. The FAS-DPD can test up to 50ppm FC. Yours only goes to 5ppm.

A CYA test is critical to pool management. You must know the CYA level of your water in order to determine the amount of FC necessary to keep your pool sanitary and algae-free. See: http://poolsolutions.com/gd/best-gue...ine-chart.html

Another option is to go get a cheap OTO kit (not refills, you need the kit with the comparator tube). Then you will be able to test FC/CC with fresh reagents although still only to 5ppm. You can use this to at least help go a bit higher: https://lh6.googleusercontent.com/-t...rev%252001.jpg

Finally, I would strongly encourage you to save up for the K-2006C.

Thing about that is, last summer my pool was highly algae-free, so since I'm trying to save money, I'm going w/the if-it-ain't-broke philosophy. Unless there's a way to make the K-2006C last several years, it'll have to wait.

[FormerBromineUser]

..

[FormerBromineUser]

...CarlD..: (and) I quote, "So, if you pour 1.88ml of bleach/liquid shock/liquid chlorine into 5 gallons of fresh water, you should get the same FC reading as if you dump 1 gallon into 10,000 gallons of water." .

Well, again I was hoping Carl would chime in... but it sounds to me like you reagent is too old.

Are you anywhere near a border to the US to get a kit? If not, get an OTO or HTH 6-way test kit.

How is your pool looking? Does it feel slimy at all?

[Whetstone613]

Well, w/a roof antenna, I can get CBS and PBS, but not ABC. The short answer though is: not close enough.

The pool appears to be in very good shape. Thing about chlorine is the tests last season didn't cause me to do anything different--it seemed that the chlorine was always where I wanted it. However, I did have minor problems w/alkalinity and pH.

Is there somewhere I can go to just get individual reagents? I don't even think I use some of them, and if some are still good, then I can just replace the bad ones (which will then beg the question: how do I know what's bad?). I did find a place that doesn't seem to want to ship to Canada