Not sure if the link worked so here it is again. http://s725.photobucket.com/user/slachey/library/
Re: Solar Panel plumbing and flow rate
Not sure if the link worked so here it is again. http://s725.photobucket.com/user/slachey/library/
18' x 33' AG pool, 2HP US Motors / PMX pump with 200 # Columbia Sand Filter, (2) 4 x 20 FAFCO Solar Panels
Re: Solar Panel plumbing and flow rate
In this picture, are the panels on the left and the equipment on the right? Because the valve position would not be correct position for solar operation. You want to close off the bypass (partially or fully with handle upward). Otherwise, no water will flow through the panels.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Re: Solar Panel plumbing and flow rate
The panels are to the left and I have reconfigured the valve so the "off" position is vertical when all flow is going to the panels.
18' x 33' AG pool, 2HP US Motors / PMX pump with 200 # Columbia Sand Filter, (2) 4 x 20 FAFCO Solar Panels
Posting Permissions
Reply With Quote
Bookmarks