+ Reply to Thread
Results 1 to 10 of 31

Thread: First time opening pool since joining this forum

Hybrid View

  1. #1
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: First time opening pool since joining this forum

    While you're waiting, how does your water look? Is it clear?
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  2. #2
    Join Date
    May 2014
    Location
    Sussex, WI
    Posts
    68

    Default Re: First time opening pool since joining this forum

    Water is green and cloudy
    25k gal pool, 18 x 36, 3' to 8' depth. Vinyl lined. Single speed pump

  3. #3
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: First time opening pool since joining this forum

    Bummer. More questions:
    1) did you retest? If so, did you register any FC/CC?
    2) can you see the bottom? If so, is there any gunk you can clean out? If not, use your leaf Rake and see if you can dig up any organics in there.
    3) did you add cya yet? If not, don't.
    4) how is your supply of 0871 and powder for testing? You will need a good supply for your next steps.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  4. #4
    Join Date
    May 2014
    Location
    Sussex, WI
    Posts
    68

    Default Re: First time opening pool since joining this forum

    I did retest. FC is 4, CC is 2. I can't see the bottom. I did add the CYA. I'll have to start cleaning the debris of the bottom over the next few days. It's going to be a cool week, so I'm not too concerned about having it ready for the weekend.
    25k gal pool, 18 x 36, 3' to 8' depth. Vinyl lined. Single speed pump

  5. #5
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: First time opening pool since joining this forum

    .
    Okay. Read CarlD's excellent post here: http://www.poolforum.com/pf2/showthr...You-have-ALGAE!!!

    Towards the bottom it talks about algae and the importance of brushing, etc.

    Get the crud out ASAP as it will use up your chlorine as fast as you put it in. Your high CC proves this.

    Bring your FC up to 15 and keep it there, not letting it drop below 12. Keep your pump on continuously.

    If adding 1/2 gallon of 8.25% brought you to FC of 4, your pool volume might very well be less than you think.

    A green, cloudy pool would not be clear by this weekend anyway; it will take a while, sorry.

    Stock up on bleach, Taylor reagent R-0871, and patience.

    Let us know how it goes and if you have any other questions. Wishing you good luck!
    Last edited by FormerBromineUser; 05-18-2015 at 10:40 PM.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  6. #6
    Join Date
    May 2014
    Location
    Sussex, WI
    Posts
    68

    Default Re: First time opening pool since joining this forum

    Hi again, I'm working on getting the crud out. It appears to be working. The color has gone from a deep green to a light green. It's still got a lot of brushing and pool cleaner work to go, but i'm seeing progress.
    I'm sure I've got 25,000 gallons, I actually added a full gallon of 12.5% to get my FC to 4.
    2 gallons of 12.5% and a gallon of acid over the past 3 day, my ph is down to 7.4, but my FC/CC is only 3/.4. So I added another 2 gallons tonight of 12.5% to get that chlorine level up. I m considering some clarifier to get the finer granules to clump, but I'll wait to see how the weekend goes.
    25k gal pool, 18 x 36, 3' to 8' depth. Vinyl lined. Single speed pump

  7. #7
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: First time opening pool since joining this forum

    No clarifier, please. Good job on the crud. Thanks for explaining the FC results. What kind of filter do you have?
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

+ Reply to Thread

Similar Threads

  1. First time opening IG pool question (unknown part)
    By kilik693 in forum --cleanup--
    Replies: 0
    Last Post: 05-15-2015, 09:48 AM
  2. New to the forum and first time Pool Owner
    By DonDon1145 in forum General Interest
    Replies: 10
    Last Post: 09-08-2013, 09:03 PM
  3. New pool owner joining the forum
    By tpspeier in forum General Interest
    Replies: 2
    Last Post: 08-12-2013, 10:08 PM
  4. Opening pool for first time with chlorine
    By aciam in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 3
    Last Post: 05-24-2012, 08:12 AM
  5. OPENING POOL FOR FIRST TIME...need help
    By lilypool in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 3
    Last Post: 06-13-2011, 02:13 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts