Re: How much Calcium it too much?
Originally Posted by
LearningCurve
I havn't opened my pool yet this year. I know the calcium has been 190-220 the last few years and was curious if that in itself caused any problems like clogging filters.
It doesn't sound like I need to worry about it.
Thanks!
I'd kill for 220 CH (kidding, of course!)...yeah, you've got nothing to worry about with numbers like that. I think you mentioned you have a vinyl pool. CH is really a water parameter that liner pools don't need to worry about. Perhaps if it were 0ppm or below 120ppm and you had a water heater, some might say you should raise it a bit, but other than that, most liner pool owners don't even bother testing for CH. Plaster pools are a different story.
Good luck with your opening when you get to it and enjoy the swim season wherever you are....
16k gal IG gunite PebbleTec (Caribbean Blue), 18' x 36' free form with raised spa/spillway and separate rock waterfall. All Pentair Equipment pad - 3HP IntelliFlo VS / 1.5HP WhisperFlo, MasterTemp 400k BTU/hr heater, QuadDE-100 filter, IC40 SWCG, IntelliTouch/EasyTouch Controls
Bookmarks