Metal in the water (Fiberglass 35K pool)

[blk133]

When you talk about sequestering agent, which one do you talk about?
Is there a specific one for a fiberglass pool? Can you guys provide a link if possible as where I could buy it?

[mbar]

I used Sequasol this year, the site I bought it from is:
http://www.focuspools.com/products/G...n-SEQUASOL.asp
I have also used Jack's Magic and Metal Free, you can google them and find them online. I would use enough according to the directions for the volume of the pool, and a little extra too.

[blk133]

Thank you very much!

I ordered 4 bottles of SEQUASOL for 35000 Gallons pool, as you said it's better more than not enough.

I also bought 5 lbs of Vitamin C yesterday from one of the websites that you provided a link for.

Can't wait for all of it to come so that I could see a true color of my pool again. Tired of seeing this yellowish/brown tint to it.

Thank you again!
B.

[mbar]

Good luck, and feel free to ask any questions you may have - you're going to love it, it is like magic!

[blk133]

Can someone please tell me how much of Ascorbic Acid do I need to put in a 35K fiberglass pool?

The metal stain is all over the walls and floor.
I tried 5 foam cups around the pool but it seems not enough. Acid desolves very quickly and I started to see white streaks on the wall but overall the pool is still not white.

I have a DE filter EC-75 and it doesn't have a circulate option. It is always filtering. Is it ok? Or should I turn it off while I am doing it?

Thanks,
B.

[mbar]

You will need about 3 or 4 lbs. I use anywhere from 1 to 2 in 16,500 gal. It is ok to turn the pump off and walk around the pool, dropping the ascorbic acid down the sides of the pool. Once it is all dissolved, you can put your pump back on and let it filter. Let it filter 24/7. I would start with 3 lbs, and then if all the stain isn't gone in 1 hour walk around and put the other pound in where you still see the stain. Keep me informed, and feel free to ask any questions you have.

[blk133]

I used about 3.5-4 lbs of Ascorbic Powder, can't say exactly, but I still have about 20% left in the bag.
2 hours later I droped 4 bottles of Sequasol.

I can still see stains in some places they are very lite, but mostly it's looking good.

Do you think it is ok to add more of Ascorbic Acid even though I already added a Sequasol?

When I am adding Ascorbic Acid it looks like it disolves before even reaching the bottom of the pool.

My Chlorine level is 0

Thanks,
B