Results 1 to 4 of 4

Thread: chemical levels...Still learning

Threaded View

  1. #1
    Join Date
    Jun 2013
    Location
    Georgia
    Posts
    67

    Default chemical levels...Still learning

    We left the pool open over the winter not really maintaining the water, just keeping the leaves out. It looks pretty good...a little cloudy... but I want to get it adjusted before it gets too hot and problems start to develop. Toward the end of last season I started using the Taylor K-2006 test kit and the BBB method...before that always used the pool store to start it up and maintain. One question I have about the BBB method is do I need to use tablets in the skimmer? I haven't seen that anywhere.

    Any help on my levels is appreciated.

    Testing the water on Friday the FC: 1 , CC:1.5, PH:7.6, ALK; 100, CAL:150, CYA:30, Saturation -.3 (If I am using the chart correctly)


    In-ground 23,000, Vinyl, Purex Triton II Sand Filter,
    Last edited by Fiveattripp; 03-30-2015 at 11:15 AM.
    PF=5; 23K gal IG kidney vinyl pool, Triton II Sand Filter, Whisperflow VS Pump, Taylor 2006 kit, Jacuzzi/Carvin Saniclear 40 SWCG

Similar Threads

  1. New user-need help on chemical levels
    By TazJMT in forum Pool Chemicals & Pool Water Problems
    Replies: 2
    Last Post: 06-21-2014, 04:36 PM
  2. Chemical levels???
    By mommak in forum Pool Chemistry for Intex-type Pools
    Replies: 4
    Last Post: 06-02-2014, 04:21 PM
  3. How to add or adjust chemical levels
    By justlane4 in forum Dealing with Algae & Slime
    Replies: 3
    Last Post: 06-26-2012, 10:21 PM
  4. chemical levels seem ok?
    By GerriLeAnne in forum DPD-FAS based testing
    Replies: 1
    Last Post: 07-24-2010, 02:12 PM
  5. Need targets for chemical levels
    By joanie109 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 09-16-2009, 12:32 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts