Our Mountain Retreat

[FormerBromineUser]

Thanks guys.... Any progress, Toy?

[Toybuilder]

We've had no progress this week other than laying the last bit of the tile on the sun bench. Weather has been horrible here. We're hoping for plaster on Monday, but the weather isn't looking promising. If it does happen, I'll post pics when it's complete.

[Toybuilder]

Evening everyone,

Hope all have had a good Memorial Day. We’re finally filling, but only the pool. The PB wasn’t happy with the way the plaster turned out in the spa so they’ll be returning tomorrow to cut, re-plaster, and fill.

Equipment pad is ready to go, and all my concerns have been addressed.

Here’s what’s progressed today:






Final walkthrough is on Friday and we should be swimming! Finally!

[FormerBromineUser]

Woot! Looks great!!!

[JimK]

Woo hoo!

There's some ominous looking clouds in one pic....

[swimdaddy]

In the pic where it looks like you are filling the pool, what is that garbage can looking thing on the deck? Looks like your water is going through it before it goes in the pool? Some kind of filter or pre-treatment?

[Toybuilder]

In the pic where it looks like you are filling the pool, what is that garbage can looking thing on the deck? Looks like your water is going through it before it goes in the pool? Some kind of filter or pre-treatment?

The trash can is filled with sodium bicarbonate. I discussed this with the builder a while back. On our previous pool (back in Ca), our plaster didn't last very long, 3 years. It was rough and coming out in small chunks. Wasn't sure if it was because of the plaster used, the builders ineptness, or our lack of understanding. Either way, I didn't want to go thru that again. So, with a tip from an awesome member here, we found this procedure to help protect the plaster and limit the dust.