+ Reply to Thread
Results 1 to 10 of 23

Thread: Robotic Cleaner Recommendation for New Pool Build

Hybrid View

  1. #1
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    Check out ThePoolCleaner. I own the suction side but they also make a pressure side which doesn't require much in the way of flow rate to operate so a booster is not required.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  2. #2
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    Mark: sorry to hijack... But could you take a look at this: http://www.poolforum.com/pf2/showthr...470#post129470 Thanks
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  3. #3
    Join Date
    Dec 1969
    Location
    Parker, CO
    Posts
    161

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    Quote Originally Posted by mas985 View Post
    Check out ThePoolCleaner. I own the suction side but they also make a pressure side which doesn't require much in the way of flow rate to operate so a booster is not required.
    Thanks for the suggestion, Mark. Reviews on ThePoolCleaner are very good. My biggest concern with this is that I don’t think we’ll be running the pump long enough to get a thorough cleaning. According to the builder, we will be running the VS pump for about an hour and a half a day. The volume of the pool is approximate 16k gals.

    We haven’t pulled the trigger on a cleaner just yet so I will keep this in mind. If we do go with this cleaner, we’ll need the suction side model also as we will not be putting in a dedicated pressure side connection. The price is much nicer than the robotics I've mentioned.

  4. #4
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    751

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    Quote Originally Posted by Toybuilder View Post
    Thanks for the suggestion, Mark. Reviews on ThePoolCleaner are very good. My biggest concern with this is that I don’t think we’ll be running the pump long enough to get a thorough cleaning. According to the builder, we will be running the VS pump for about an hour and a half a day. The volume of the pool is approximate 16k gals.

    We haven’t pulled the trigger on a cleaner just yet so I will keep this in mind. If we do go with this cleaner, we’ll need the suction side model also as we will not be putting in a dedicated pressure side connection. The price is much nicer than the robotics I've mentioned.
    1.5 hr run time seems awfully short to keep the pool clean.
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

  5. #5
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    I was thinking the same thing!

    Mark's the pump run-time guy for sure so hopefully he will confirm.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  6. #6
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    There are people that run shorter than that so it isn't impossible. You can read the run time study in my signature and they found that there was no improvement in water quality beyond 2 hours of run time. Going beyond that is mostly about skimming and bottom cleaning with a cleaner that dictates run time and even that isn't necessary since that is mostly aesthetics.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  7. #7
    Join Date
    Dec 1969
    Location
    Parker, CO
    Posts
    161

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    Quote Originally Posted by JimK View Post
    1.5 hr run time seems awfully short to keep the pool clean.
    Sorry everyone. That was the suggestion for the run time of a robotic cleaner from the builder. In review of his quote, the run time for our pool will be approximately 3 hours. My bad. The brain is still on holiday mode apparently.

  8. #8
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    751

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    Quote Originally Posted by Toybuilder View Post
    Sorry everyone. That was the suggestion for the run time of a robotic cleaner from the builder. In review of his quote, the run time for our pool will be approximately 3 hours. My bad. The brain is still on holiday mode apparently.
    Ah......thanks for the clarification.

    Sorry I don't have any feedback for you on robotic cleaners. I have no experience with those.
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

  9. #9
    Join Date
    Dec 1969
    Location
    Parker, CO
    Posts
    161

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    We've started! Woohoo! Here's a link to the photo post.

    http://www.poolforum.com/pf2/showthr...536#post129536

  10. #10
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    751

    Default Re: Robotic Cleaner Recommendation for New Pool Build

    Quote Originally Posted by Toybuilder View Post
    We've started! Woohoo! Here's a link to the photo post.

    http://www.poolforum.com/pf2/showthr...536#post129536
    Yea!

    Did you decide on a cleaner?

    I'm looking forward to see more pics as it progresses.
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

+ Reply to Thread

Similar Threads

  1. Robotic cleaner for above ground pool
    By jalanrr in forum Pool Cleaning: Manual or Automatic
    Replies: 5
    Last Post: 09-21-2014, 07:24 PM
  2. Robotic pool cleaner recommendation
    By southjerseypool in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 03-31-2014, 05:52 PM
  3. Robotic cleaner AND a floor cleaner system?
    By Yellowdog in forum Pool Cleaning: Manual or Automatic
    Replies: 1
    Last Post: 07-29-2011, 09:31 AM
  4. Orion robotic pool cleaner
    By luvapool in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 04-12-2006, 09:28 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts