Results 1 to 10 of 26

Thread: I think I want to go salt.

Threaded View

  1. #11
    SJohnson is offline Registered+ Thread Analyst SJohnson 0
    Join Date
    Mar 2006
    Location
    Charleston, SC
    Posts
    53

    Default

    If there's a leak or constant refilling, wouldn't his total dissolved solids be lower??, 650 seems a little high to me . . . I say bring your CYA up to at least 60 before you install the SWC. Triclor use with low CYA levels, hmmm . . . something's not right with this picture, I agree . . . All those numbers look exactly where you want them to be!!

    You're not using Calcium Hypochlorite are you?? You did say, "I regularly dump about 1 pound of granules" . . . That would explain allot, but I didn't think you were supposed to use that with in-line feeders . . .

    SJohnson
    Last edited by SJohnson; 04-04-2006 at 09:09 PM.

Similar Threads

  1. Salt water system faulting high salt.
    By Skelly607 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 3
    Last Post: 06-27-2013, 10:43 AM
  2. Aqua Rite low salt reading when salt has been tested high
    By DirtRider67 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 08-19-2011, 05:58 PM
  3. Salt Level Keeps High without Addition of Any Salt
    By TooSalty in forum The China Shop
    Replies: 11
    Last Post: 08-13-2011, 01:56 PM
  4. Salt in a Non-Salt Water pool
    By wollypog6 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 16
    Last Post: 07-31-2006, 10:01 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts