Results 1 to 10 of 109

Thread: Salt Water Chlorine Generator for New Pool Build

Threaded View

  1. #21
    Join Date
    Jul 2010
    Location
    Largo, Florida
    Posts
    509

    Default Re: Salt Water Chlorine Generator for New Pool Build

    Quote Originally Posted by Toybuilder View Post
    I found out yesterday for our pipes not to freeze over the colder months, the builder will set our pump speed to run very slowly to keep water moving thru the pipes. I need to nail this part of it down a little bit more because I don’t know if the pump is set to run continually or just when the temperature is below freezing. If it’s running continually I’m not sure what this will do to our electrical bill, or the equipment for that matter, but I guess we’re going to find out.
    Normally in areas where you get a hard freeze people "close" their pool. This involves removing the water from the pipes so that busted pipes is a non issue. Unless you have a generator/UPS for the pool pump, relying on it running all winter is probably a bad idea. One power outage and you might have busted pipes.

    Here's information on how to close a pool. You can also hire a pool guy to do it for you if you'd rather not DIY.
    Last edited by kelemvor; 04-20-2015 at 10:39 AM.
    rectangle 11.5K gal IG concrete pool;; 125sf cartridge filter; 2hp 1 speed pump; K-2006, k-1766; PF:10

Similar Threads

  1. Problems with SWCG (salt water chlorine generator) on inground pool
    By jdubose in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 03-22-2014, 09:16 AM
  2. Replies: 8
    Last Post: 04-09-2012, 04:37 PM
  3. Salt water chlorine generator research
    By sevver in forum Pool Equipment & Operations
    Replies: 11
    Last Post: 07-23-2006, 07:05 PM
  4. Salt Water Chlorine Generator
    By blonde_b_tan in forum Pool Equipment & Operations
    Replies: 9
    Last Post: 06-03-2006, 01:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts