BUMP
(Sorry Mods, I should have posted this question in the Subscriber Forum. My Bad!!!)
BUMP
(Sorry Mods, I should have posted this question in the Subscriber Forum. My Bad!!!)
16k gal IG gunite PebbleTec (Caribbean Blue), 18' x 36' free form with raised spa/spillway and separate rock waterfall. All Pentair Equipment pad - 3HP IntelliFlo VS / 1.5HP WhisperFlo, MasterTemp 400k BTU/hr heater, QuadDE-100 filter, IC40 SWCG, IntelliTouch/EasyTouch Controls
I don't have an answer, but I'm curious as well.
rectangle 11.5K gal IG concrete pool;; 125sf cartridge filter; 2hp 1 speed pump; K-2006, k-1766; PF:10
I'm really hoping that Leslie's is using a safety colorant in their HCl as opposed to this coming from trace impuritiesThe color is vibrant yellow and commercial grade HCl is usually just a pale straw yellow to slightly greenish yellow when iron (Fe3+) or free Cl2 gas is present.
One method of production is by the following reaction -
H2SO4 + 2 KCl --> K2SO4 (s) + 2 HCl (gas)
The gaseous HCl is then drawn off and typically absorbed in a fluid bed to make a concentrated aqueous solution. Reagent grade HCl is then made from this feed stock by further purification techniques to remove iron salts (pale straw yellow).
Considering how vibrant yellow the Leslie's product is, either they are selling contaminated garbage (I'd really hope not but wouldn't put it past them) or they are coloring the MA for safety.
I had hoped someone on the Forum would know for sure. If not, I'll try their customer service at some point to see if they have an answer.
Last edited by SunnyOptimism; 10-12-2014 at 10:40 PM. Reason: FFT (fat finger typing)
16k gal IG gunite PebbleTec (Caribbean Blue), 18' x 36' free form with raised spa/spillway and separate rock waterfall. All Pentair Equipment pad - 3HP IntelliFlo VS / 1.5HP WhisperFlo, MasterTemp 400k BTU/hr heater, QuadDE-100 filter, IC40 SWCG, IntelliTouch/EasyTouch Controls
Bookmarks