+ Reply to Thread
Results 1 to 10 of 52

Thread: New Salt System, algae is recurring regularly

Hybrid View

  1. #1
    Join Date
    Sep 2014
    Location
    Tucson, AZ
    Posts
    222

    Default Re: New Salt System, algae is recurring regularly

    No.

    Since the overnight test is attempting to determine the loss of chlorine due to the organics and biologicals in the water (no UV degradation at night), you do not want a source of chlorine adding FC to your water. Just get the water up to shock level, leave the pumps running and turn off the IC40.

    Good luck.
    16k gal IG gunite PebbleTec (Caribbean Blue), 18' x 36' free form with raised spa/spillway and separate rock waterfall. All Pentair Equipment pad - 3HP IntelliFlo VS / 1.5HP WhisperFlo, MasterTemp 400k BTU/hr heater, QuadDE-100 filter, IC40 SWCG, IntelliTouch/EasyTouch Controls

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: New Salt System, algae is recurring regularly

    If you lose no more than 1ppm of FC overnight and have less than 0.5pm of CC, we typically recommend one additional day of leaving the chlorine level high for added insurance and then you can let it drift down.

  3. #3
    Join Date
    Sep 2014
    Location
    Tucson, AZ
    Posts
    222

    Talking Re: New Salt System, algae is recurring regularly

    Quote Originally Posted by Watermom View Post
    If you lose no more than 1ppm of FC overnight and have less than 0.5pm of CC, we typically recommend one additional day of leaving the chlorine level high for added insurance and then you can let it drift down.
    Totally agree with that! Thanks for the clarification.
    16k gal IG gunite PebbleTec (Caribbean Blue), 18' x 36' free form with raised spa/spillway and separate rock waterfall. All Pentair Equipment pad - 3HP IntelliFlo VS / 1.5HP WhisperFlo, MasterTemp 400k BTU/hr heater, QuadDE-100 filter, IC40 SWCG, IntelliTouch/EasyTouch Controls

+ Reply to Thread

Similar Threads

  1. traditional salt chemical system or go with the Mineral Springs salt system?
    By Thehamms in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 5
    Last Post: 06-24-2014, 11:46 PM
  2. Recurring Algae
    By Tom.B in forum Dealing with Algae & Slime
    Replies: 7
    Last Post: 04-04-2014, 08:46 PM
  3. Mustard Algae in salt system pool
    By karla in forum Dealing with Algae & Slime
    Replies: 12
    Last Post: 09-08-2011, 07:03 PM
  4. Adding CYA and recurring algae bloom
    By ralph in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 08-23-2011, 08:31 AM
  5. Recurring Algae on Bottom of Pool
    By 16X32AG_Bob in forum Dealing with Algae & Slime
    Replies: 7
    Last Post: 07-14-2009, 02:16 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts