Results 1 to 8 of 8

Thread: "Puckers"

Hybrid View

  1. #1
    Join Date
    Sep 2014
    Location
    Hollywood,Fl
    Posts
    5

    Default Re: "Puckers"

    The stenner looks interesting. Still something simple like a iv drip from a suspended 5 gal bucket with the right diameter hose and fittings. Really I bought 2 1/2 gal spring water that had a hole in it and leaked 1/2 a gal in two days before I recognized it all for free. How simple can you get.

  2. #2
    Join Date
    Sep 2014
    Location
    Tucson, AZ
    Posts
    222

    Default Re: "Puckers"

    If simple is what you're after, you could also consider installing a venturi Injector. You install it in your piping (after filter on your return line) and you let the flow of the pump draw in whatever chemical you want. They are used a lot with ozone systems to deliver a stream of ozone gas into the water but work just as well with liquid fluids. You can look them up online as well. The only additional equipment you'd need is a shutoff valve and, possibly, a metering valve to adjust fluid flow.

    Anyway, just some ideas to consider. There's tons of ways to skin the cat of injecting chlorine. Just depends on how fancy you want to get. Good luck with your setup and, if/when I get approved for forum access as PF regulars (I'm still awaiting registration approval), I'd love to see your final setup.

  3. #3
    Join Date
    Sep 2014
    Location
    Hollywood,Fl
    Posts
    5

    Default Re: "Puckers"

    A 2 1/2 or 5 gal chlorine jug disguised as a critter drips 24/7 above the return line. My friend is a nurse and she is coming over next weekend and iv drips patients all the time who need to be mobile and my pool never really goes anywhere.

  4. #4
    Join Date
    Sep 2014
    Location
    Hollywood,Fl
    Posts
    5

    Default Re: "Puckers"

    Thanks Sunny. Soon as a can I will post some deep water pics of mermaid and seahorse, carbs and turtles that my friend made when I had the pool diamond brited.

  5. #5
    Join Date
    Sep 2014
    Location
    Hollywood,Fl
    Posts
    5

    Default Re: "Puckers"

    Coming out of the closet I should just state from almost the beginning that I am a Rep. Being a lifetime member of the Surfrider Foundation and a ocean lover most of our kind have overwhelming desires to convert our pools into skateboarding arenas. It's not a business but rather a way of life with slogans like I'd rather be surfing or at the beach so in the back of my mind every additional maintaince cost comes the "drain and skate" finial solution. It came really close this time however the recent past upgrades won the day.
    Being a barefoot woodworker with a full shop by the pool it does work good as a sawdust remover but for swimming I can be in the Atlantic in 10 or 15 minuites. Anyway it is a personal dilemma better suited for poological counseling.

    Take care,
    Ananda

Similar Threads

  1. new liner not flat against wall; has waves and puckers; fixable?
    By poolgal13 in forum In-Ground Pool Construction and Repair
    Replies: 11
    Last Post: 11-20-2012, 03:46 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts