There is a stickied thread at the top of this section of the forum with some information about closing an AG pool that should answer most of your questions. If it doesn't after reading it, post further questions here and someone will try and help.
It's getting really cold here in CO and it's time to close the pool down. We had a dusting of snow already. I tested the water and was wondering how it looks.
above ground, about 10,000 gallons, swg, 1600 gph sand filter
alk = 80
fc = 9
cc= 0
ph = 7.5
cal = 60
cya = 40
This is our first year and I'm not sure that process and could use some help. I read to use some 60% polyquat algaecide, can I get that at walmart? Does anything need adjusted? Thanks much
There is a stickied thread at the top of this section of the forum with some information about closing an AG pool that should answer most of your questions. If it doesn't after reading it, post further questions here and someone will try and help.
Bookmarks