+ Reply to Thread
Results 1 to 10 of 11

Thread: Why add CYA at all?

Hybrid View

  1. #1
    Join Date
    Jun 2006
    Location
    Central Texas
    Posts
    217

    Default Re: Why add CYA at all?

    Thanks All, again,

    I went ahead and bought some CYA and have a small quantity in a sock in the skimmer. Is there a downside to targeting about 15-20 ppm and then letting the pucks bring it up slowly from there? I did have low chlorine (0.5ppm) after this first day after the refill, but it will take a few days to set the chlorinator.

    BTW, if I use a cost of $100 per 40 pounds of tablets, that's about 15 cents an ounce, and for a 15,000 gallon pool I've read I'll be using 3 ounces a day to keep 2ppm chlorine, so 45 cents a day. Bleach at Walmart was $2.30 for 1.5 gallons, and a half gallon makes 2ppm chlorine in the same pool, so 76 cents a day. I must be calculating something wrong?

    TW

  2. #2
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Age
    71
    Posts
    3,743

    Default Re: Why add CYA at all?

    The problem is that as your stabilzier levels increase you need to increase your FC levels to keep enough 'active' chlorine in the pool. You then use more pucks which then increase your stabilzier levels even more.
    Check out this thread for info on chlorine levels and stabilzier
    http://www.poolforum.com/pf2/showthread.php?t=365
    Retired pool store and commercial pool maintenance guy.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts