I put the Cal-hypo tabs in my skimmer once and in 2 hours they were mush and the skimmer was jammed up....Not a fan!
I put the Cal-hypo tabs in my skimmer once and in 2 hours they were mush and the skimmer was jammed up....Not a fan!
Carl
I don't think that's typical of all CH tabs. However, you could work around that in several different ways, such as putting them in a perforated plastic bottle that's resting in the skimmer.
Interesting idea, but I haven't had to mess with it in years.
Carl
How does the commercial feeder work?
I have a chlorinator sys in the well house that uses a holding tank I fill with a bleach/water mixture and a chem pump (piggy backing my well pump) that pumps it in. Wondering if I could find some 100% sodium hypochlorite somewhere and use a similar pump to meter it in. I have a RS6 controller with a spare relay I could program to do pretty much whatever.
Outta my league here. Just bumping thread cause I see you're checking for responses.
26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO
Bleach is sodium hypochlorite mixed with brine, which is saltwater. Strongest I know of is nominal 12.5%, which, when fresh cam test as high as 14%.
Carl
I did a bit more reading and discovered 100% sodium hypochlorite is a solid, unstable and very hard to find. Guess that's out.
Wish I could find an alternative to buying gallons and gallons of bleach every week. Seems like there would be a market for CYA-free tabs if they were available.
IG concrete 30k gal FNS60 DE filter 2hp single speed Haywood pump
Bookmarks