+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 155

Thread: Test results on new pool in Tucson

Hybrid View

  1. #1
    Wilco's Avatar
    Wilco is offline Registered+ Thread Analyst Wilco 0
    Join Date
    Aug 2014
    Location
    Tucson
    Posts
    66

    Default Re: Test results on new pool in Tucson

    Ok, new twist. Given your thoughts that there is still something organic going on. I reconsidered something. At different degrees, there has rather consistently been a loose, brown, fine debris that accumulates on the step down shallow area surrounding the pool, and somewhat in the corners.i thought this was dirt, as we have planters, etc around the pool that may leak into the pool during storms I suppose. I had been brushing daily last month, but had gotten away from that as the chlorine upkeep became paramount. Is this algae/dead algae?

  2. #2
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Test results on new pool in Tucson

    If you were here in the NE we'd be saying pollen--it's allergy season here.
    Carl

  3. #3
    Wilco's Avatar
    Wilco is offline Registered+ Thread Analyst Wilco 0
    Join Date
    Aug 2014
    Location
    Tucson
    Posts
    66

    Default Re: Test results on new pool in Tucson

    Ok, so I just had a revelation, I think. I believe I mentioned that I had a 500 gallon spa attached to the pool? Well, it's attached but only with overflow into the pool. I never actually tested the spa water, thinking it was all the same, and it would splash it with bleach or shock, but not test it. We'll I tested it. Ph unmeasurable high, like probably 9, and no detectable FCC even after a gallon of Clorox. I think it has been bleeding into the pool and acting as a feeder of algae, and I was just band aiding it instead of treating the source. So I hit it with acid and more bleach and will retest often. Jeez.

  4. #4
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Test results on new pool in Tucson

    Regardless, it's not the pollen that is causing your chlorine demand. Get FC to 25 and try your very best to keep it there without too much of a drop. 11 jugs doesn't seem like that much to tell you the truth. Keep the faith!
    Last edited by FormerBromineUser; 09-16-2014 at 09:15 PM. Reason: Cross-post

  5. #5
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Test results on new pool in Tucson

    Okay, cross-post. Let us know results of spa testing. Spas can be nasty creatures. My apologies for not remembering the spa over-flow. Why do installers do that? Yuck.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  6. #6
    Wilco's Avatar
    Wilco is offline Registered+ Thread Analyst Wilco 0
    Join Date
    Aug 2014
    Location
    Tucson
    Posts
    66

    Default Re: Test results on new pool in Tucson

    Got the cl up to 25 in the spa, but ph still high, added 2 more cups of acid. Plus we are supposed to get major monsoon rains next few days. I am going to need more testing supplies, that's for sure. Got the too kit, but not ready for it at all yet.

  7. #7
    Wilco's Avatar
    Wilco is offline Registered+ Thread Analyst Wilco 0
    Join Date
    Aug 2014
    Location
    Tucson
    Posts
    66

    Default Re: Test results on new pool in Tucson

    *OTO kit

  8. #8
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Test results on new pool in Tucson

    Remember to go through PoolDoc or WaterMom's links whenever buying on Amazon! And remember also, that Amato Industries discounts shipping for multiple items upon check-out (not before). Check especially your supplies of : 0871. 0870, 0004, and 0013. Most keep well over time and stored out of sun and cool-ish.
    Last edited by FormerBromineUser; 09-16-2014 at 09:27 PM. Reason: Remove that dang signature!
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  9. #9
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Test results on new pool in Tucson

    Uh, sorry. Another thought. At 500G, can you just drain and refill that spa? AND please make a signature so we won't forget your spa in the future!

  10. #10
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Test results on new pool in Tucson

    Quote Originally Posted by FormerBromineUser View Post
    Regardless, it's not the pollen that is causing your chlorine demand.
    Actually, pollen in the water will increase chlorine consumption. Anything organic in the water will. It is not the entire cause of his issue but just wanted to clarify that anything organic in the water (pollen, leaves, etc.) will use more chlorine.

+ Reply to Thread

Similar Threads

  1. Need help w/test results
    By The Mermaid in forum Dealing with Algae & Slime
    Replies: 11
    Last Post: 10-02-2006, 05:26 PM
  2. More Test Results!
    By mkfmedic in forum DPD-FAS based testing
    Replies: 5
    Last Post: 09-12-2006, 01:15 PM
  3. Test results vary between meter and drop test - not sure what to do?
    By west1745 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 14
    Last Post: 07-29-2006, 03:27 PM
  4. First 234s test results and warning about pool stores' results
    By SoCalBoo in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-16-2006, 01:48 PM
  5. First Test Results
    By Cutter in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-14-2006, 07:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts