+ Reply to Thread
Results 1 to 10 of 155

Thread: Test results on new pool in Tucson

Hybrid View

  1. #1
    Wilco's Avatar
    Wilco is offline Registered+ Thread Analyst Wilco 0
    Join Date
    Aug 2014
    Location
    Tucson
    Posts
    66

    Red face Re: Test results on new pool in Tucson

    Ok. I suppose kids need to stay out of pool if I am shocking that high? Also, I am going to start spreading my bleach purchases around. I already had comment from checker about how many bodies I was trying to get rid of. ( I know that's lime, but we are talking walmart here)

  2. #2
    Wilco's Avatar
    Wilco is offline Registered+ Thread Analyst Wilco 0
    Join Date
    Aug 2014
    Location
    Tucson
    Posts
    66

    Default Re: Test results on new pool in Tucson

    Also, this is a dumb question, but when doing the cl testing(10cc) do the 2 scoops of powder need to be close to exact? Going over or under affect the testing? It seems not, but assumptions .."...

  3. #3
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Test results on new pool in Tucson

    Let them swim, especially as your CC is low. Just don't wear expensive swimwear. And don't worry about green hair!
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  4. #4
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Test results on new pool in Tucson

    Personally I would recommend only using 1/2 scoop of powder. Whatever you do, just be consistent.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  5. #5
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Test results on new pool in Tucson

    No, the scoops of powder do not have to be exact at all. In fact, if one scoop turns the sample pink, you don't need to put the second scoop in.

  6. #6
    Wilco's Avatar
    Wilco is offline Registered+ Thread Analyst Wilco 0
    Join Date
    Aug 2014
    Location
    Tucson
    Posts
    66

    Default Re: Test results on new pool in Tucson

    Allright, will repost results tomorrow am, ty

  7. #7
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Test results on new pool in Tucson

    Wilco, when you have time (hahaha) think about making a signature and also becoming a subscriber! Both can be done through the settings link at the top of the page.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  8. #8
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Test results on new pool in Tucson

    This is a perfect time to scrub out and around the edges of your skimmers, jets, stairs (especially if removable), maybe even behind your lights. I just came back from helping someone who just moved into a house with a cloudy pool. Every single crevice and hide-y place was LOADED with green algae. Yuck. Also, run water through any lines you may not be using: stair jets, fountains, slides, etc.
    Last edited by FormerBromineUser; 09-13-2014 at 06:26 PM. Reason: Remove signature

  9. #9
    Wilco's Avatar
    Wilco is offline Registered+ Thread Analyst Wilco 0
    Join Date
    Aug 2014
    Location
    Tucson
    Posts
    66

    Default Re: Test results on new pool in Tucson

    ok, so after having a starting cl of 6ppm yesterday am, i waited and retested at 5pm, 2ppm. added 2 gallons of bleach, up to 13. first thing at 7 am it is 6 ppm. with ph 7.6, ta 100, cc 0.5, snf cya 100-110 of course. i know you suggested shocking to 25,but seriously, my recycle bin is already full of bleach bottles, haha.

+ Reply to Thread

Similar Threads

  1. Need help w/test results
    By The Mermaid in forum Dealing with Algae & Slime
    Replies: 11
    Last Post: 10-02-2006, 05:26 PM
  2. More Test Results!
    By mkfmedic in forum DPD-FAS based testing
    Replies: 5
    Last Post: 09-12-2006, 01:15 PM
  3. Test results vary between meter and drop test - not sure what to do?
    By west1745 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 14
    Last Post: 07-29-2006, 03:27 PM
  4. First 234s test results and warning about pool stores' results
    By SoCalBoo in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-16-2006, 01:48 PM
  5. First Test Results
    By Cutter in forum DPD-FAS based testing
    Replies: 1
    Last Post: 06-14-2006, 07:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts