Hello from Long Island

[Watermom]

Hi, John, and welcome to the Pool Forum! I wish I could help but your question is not something that I know the answer to. Hopefully, someone else will chime in soon who will know.

Just wanted to say hi! Glad to have you join us!

[CarlD]

I'm not the pump guy, either, John, but pumps are usually two pieces (roughly): The pump section, made by the labeled manufacturer, and the motor, most of which seem to be made by A.O. Smith. There are several on-line sources of seals and bearings, but you'll have to do some research on them, and I've had a less-than-optimal experience with one of them.

[BigDave]

Where on the pump is it leaking? Between the wet end and the motor?