+ Reply to Thread
Results 1 to 6 of 6

Thread: what does it mean if TC = 2-4, but FC = 0?

  1. #1
    Join Date
    May 2006
    Posts
    43

    Question what does it mean if TC = 2-4, but FC = 0?

    just needed a quick tutorial once again on the analysis of this finding.

    thank you.

    ps. all other #s are within normal limits....and water looks good, but feels way too cold - 68 degrees ambient and 20 mph winds in Delaware today, but sunny cya = 35

  2. #2
    duraleigh Guest

    Default Re: what does it mean if TC = 2-4, but FC = 0?

    Good morning,

    Well, on paper, it means that you have CC's of 2-4....not good.

    That may not be the case, however....that's awfully high CC's for pool water that is clear.

    I assume the TC test was the one where you add five drops and then match the color of the water to the yellow on the side of the comparator tube.

    Next, is the FC test you did where you count the number of drops until the water turns clear?

    Let's verify the type of tests you did and then figure out an answer.

  3. #3
    Join Date
    May 2006
    Posts
    43

    Default Re: what does it mean if TC = 2-4, but FC = 0?

    Quote Originally Posted by duraleigh
    Good morning,

    Well, on paper, it means that you have CC's of 2-4....not good.

    That may not be the case, however....that's awfully high CC's for pool water that is clear.

    I assume the TC test was the one where you add five drops and then match the color of the water to the yellow on the side of the comparator tube.

    Next, is the FC test you did where you count the number of drops until the water turns clear?

    Let's verify the type of tests you did and then figure out an answer.
    I will retest to verify

  4. #4
    duraleigh Guest

    Default Re: what does it mean if TC = 2-4, but FC = 0?

    Docs,

    Sorry, I didn't express myself more clearly. I only needed to verify that those WERE the type of tests you performed....Sorry.

    That said, it will not hurt to see if you get the same results twice

  5. #5
    Join Date
    May 2006
    Posts
    43

    Default Re: what does it mean if TC = 2-4, but FC = 0?

    retested and same result.

    my test is Taylor, first result is for FC using 5 drops each added from 2 types of bottles, giving FC number, then i add 5 more drops and get TC

    The FC is barely registering = ~0, TC is still 2-4.

    Any ideas?

    rjf

  6. #6
    waste is offline PF Support Team Whizbang Spinner waste 3 stars waste 3 stars waste 3 stars
    Join Date
    Dec 1969
    Location
    S.E Maine
    Age
    58
    Posts
    1,765

    Default Re: what does it mean if TC = 2-4, but FC = 0?

    Hi, first thing is to get some bleach in the pool, a gal of 6% should do for now. You are going to need to put a lot of bleach in to 'burn off' the cc, find any post by mwsmith2 and download the bleach calculator found in his sig. Take a look at the 'Ben's best guess" sticky at the top of the 'Using chlorine' section, to see what the 'shock' level is for your cya. If the water is clear, you shouldn't have to do multiple dosings to correct the problem. This looks like a small hiccup but not a major problem. However, get some FC in there STAT.
    Luv & Luk, Ted

    Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts