Coverstar Pool cover fabric pulled free from guide

[Les Richard]

Hello All, I have a 9yr old 16X36' automatic Deckmount Coverstar pool cover (it's on top of the pool deck) that I found on Monday morning completely open down the left side. It has pulled free from the guide rail and is submerged in the water. The other side is also showing signs of stress and has started to pull free of its guide railing at places. There is too much weight for the booms and motor to handle to try to retract the cover as is and since its loose on one side, removing the water on top of it is not an option. I thought about removing the smaller non-motor boom, and letting it free float in the water and try to retract it but one side is still anchored the the deck and releasing it may bend the rails. Called Coverstar last year for rope replacement. Extremely expensive quote along with horror stories on internet provided motivation to DIY the job.
I can't find where to upload a photo on here to help define my problem. The cover and side webbing that slides in the guides are not ripped yet so re-installing it should be somewhat easy. My main problem is retracting it for a end of year family pool party on 8/17. ANY help will be greatly appreciated.

- Les Richards
[img] IMG_1098.JPG [/img] yeah, i know... no image. I'll have to dust off my HTML books

[Watermom]

You can use Flickr, Picasa, Photobucket, etc and link to this thread with the button.

Welcome to the Pool Forum!