Diamond Brite Start Up

[BigDave]

I have to give you the same disclaimer as CarlD - I really don't know. That said. my understanding is from reading many posts here and at other internet sites.

I believe pool surfaces are supposed to cure underwater.
Some amount of variance is expected in dark pool colors.
Acid startup is sometimes part of the surface application. If you don't think your builder is following the correct process, check with the material manufacturer. They have a real reason to give you good advice and they've probably done extensive testing on thier product. Outside the manufacturer's website, all the other info you'll find on the Internet is just chatter.

Also the K-2006 will be your best friend - it will free you from pool store shenanigans and give you the confidence of knowing that your pool is clean and safe.

Is your PB suggesting a plan to start the water? You'll need CYA and chlorine. There are other chems you'll proabably need. Let us know how you're going to proceed.

[Watermom]

If the PB is planning to start up the water, don't let him add anything until you have run it past us first. Sometimes things that you don't want are added which cause problems for your pool chemistry. We may be able to head off some of those problems for you.

Welcome to the Pool Forum!