+ Reply to Thread
Results 1 to 10 of 228

Thread: Clear, but no chlorine???

Hybrid View

  1. #1
    mary jo is offline Subscriber Thread Analyst mary jo 0
    Join Date
    Aug 2014
    Location
    Batavia, IL
    Posts
    81

    Default Re: Clear, but no chlorine???

    Good Morning. I have only ever used Taylor drop testing kits. Currently I have: K2006, K1004 (residential trouble shooter) and K1106 (phosphate). This morning I tested again: FC=0, Ph-7.2, TA=130. I ran the CYA test 3 times and took an average: 150.
    My new filters have bee installed.
    15K gal, 15x30 rectangular, in-ground, vinyl liner, Pentair ¾ HP Whisperflo on 24/7, Pentair Cartridge Filter(CCP240), Heater (gas), Automatic Pool Cover

  2. #2
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,932

    Default Re: Clear, but no chlorine???

    I suggested the OTO kit because OTO will not bleach out in high chlorine.

    How did youn test CYA 150ppm?

    Congrats on the new filters.

  3. #3
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

  4. #4
    mary jo is offline Subscriber Thread Analyst mary jo 0
    Join Date
    Aug 2014
    Location
    Batavia, IL
    Posts
    81

    Default Re: Clear, but no chlorine???

    The Walmart/Target stores in my area are all out of hth OTO chlorine testing kits (it's a short swim season here in Illinois). But I did read something in Taylor's manual about how to test for high levels: they suggested adding the 5 drops each of Reagent #1 and #2 into the vial and THEN adding pool water a drop at a time to see if there is any CL is present, so I tried this and the sample never turned pink.
    15K gal, 15x30 rectangular, in-ground, vinyl liner, Pentair ¾ HP Whisperflo on 24/7, Pentair Cartridge Filter(CCP240), Heater (gas), Automatic Pool Cover

  5. #5
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

  6. #6
    mary jo is offline Subscriber Thread Analyst mary jo 0
    Join Date
    Aug 2014
    Location
    Batavia, IL
    Posts
    81

    Default Re: Clear, but no chlorine???

    Thank you Watermom!!! I think the problem is: the new post section does not show up at this time ( although it did earlier today).
    Anyway- I did find some OTO from a neighbor who had 2- and tested for chlorine and got zero again. Just to see that the OTO was indeed fresh and working I added a drop,of bleach to some water and tested it and it came out dark orange. So I think we an say that my pool has zero chlorine in it, however LOTS of CYA.
    15K gal, 15x30 rectangular, in-ground, vinyl liner, Pentair ¾ HP Whisperflo on 24/7, Pentair Cartridge Filter(CCP240), Heater (gas), Automatic Pool Cover

  7. #7
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Clear, but no chlorine???

    Hey, Maryjo.

    I am not going to make any chemical recommendations because I am new to the BBB method myself and there are MANY experts here who can help you. (I know what I would do with your test results but...... hint: it starts with b l e a and doesn't include t r i c h l )

    I live in Saint Charles, IL so I know what's available in our area. If you HAVE to purchase any chemicals from a pool store, I recommend you go to In-The-Swim. Their corporate offices are in West Chicago and they have an outlet store right there. (They also carry Taylor reagents in case you need them right away). I would not suggest returning to The Great Escape. If you are in doubt, remember that they recommended Alkalinity Plus when your TA is fine.

    Get some FC in that pool, and good luck!
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  8. #8
    mary jo is offline Subscriber Thread Analyst mary jo 0
    Join Date
    Aug 2014
    Location
    Batavia, IL
    Posts
    81

    Default Re: Clear, but no chlorine???

    OK- I will try to get the OTO kit, but I did try diluting the pool water with bottled water (all I had) and testing using at different concentrations: 1:2, 1:4 1:9 and got zero chlorine reading all times. I got the CYA reading by diluting my pool water with tap water as you recommended: 1 part pool water, 2 parts tap and got around 50 so I tripled it to get 150.
    15K gal, 15x30 rectangular, in-ground, vinyl liner, Pentair ¾ HP Whisperflo on 24/7, Pentair Cartridge Filter(CCP240), Heater (gas), Automatic Pool Cover

+ Reply to Thread

Similar Threads

  1. Clear Pool but cannot maintain free chlorine level?
    By Mr.Mooks in forum Testing and Adjusting Pool Water Chemistry
    Replies: 12
    Last Post: 07-20-2011, 07:47 PM
  2. high chlorine, but crystal clear!
    By katydid in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 07-20-2011, 08:14 AM
  3. OK It's clear now what do I need to do?
    By joanie109 in forum Chlorine Alternatives: UV, Ozone, Baquacil (PHMB), etc
    Replies: 8
    Last Post: 08-19-2006, 04:46 PM
  4. Clear solar cover options? Magni Clear?
    By PoBoy in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 07-10-2006, 11:01 AM
  5. Pure and Clear SWG
    By superjet in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 10
    Last Post: 05-23-2006, 11:30 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts