Here is a follow up on the situation,

Bur, first of all many thanks for all the replies I have received. I really appreciate it

I have drained, cleaned and filled the pool. I didn't use the pressure washer cleaned the pool with brush while draining. Also replaced the filter cartridges.

While filling the pool I have added house hold bleach at intervals about 2 - 2.5 cup at a time.
It took about half a bottle (half of 3.78 qt jug)

Once the pool is full I took a sample and test with my Taylor K2006 kit. Here are the results

FC. 1.2 ppm
CC O
PH. 7.8
TA. 120 ppm
CH. 110 ppm (Calcium Hardness)
CYA. 0

My plan is either

1) to use 3 inch tablets until I reach the needed CYA level and then switch to BBB method.
Also it looks like I need to build CC and lower the ph a little, which I guess the tablets will help with that too

Or

2) I can skip the tablets, buy conditioner to raise the CYA level and continue with Bleach as needed

I'll appreciate your comments/suggestions

Thanks very much

Matt