Re: How to properly plumb for a pool water "fill" fixture?
I'm sure not the expert here, BUT, if you put a permanent line from the house source to the pool, be CERTAIN to install a good check valve. If you loose water pressure at the house, you don't want pool water to be able to "back up" into the house. I'd also put it on the suction side to minimize the chance of a water leak.
Pappy
Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27
Bookmarks